关于VLAN中DHCP域的问题
我的问题就是如何给每个VLAN 指定各自的DHCP 域。比如vlan 2 对应dhcp test2 vlan3 对应dhcp test3. 假如:情况1: 现在有一个router 上做了多个DHCP 域.然后在switch 上划VLAN 。那么那个交换机上的ip help-address 的IP 是
我的问题就是如何给每个VLAN 指定各自的DHCP 域。比如vlan 2 对应dhcp test2 vlan3 对应dhcp test3. 假如:情况1: 现在有一个router 上做了多个DHCP 域.然后在switch 上划VLAN 。那么那个交换机上的ip help-address 的IP 是
Switching can occur at four levels, which are listed here in order of increasing performance: Process switching. With this type of switching, an incom
catalyst 5000系列交换机的端口分析(switch port analyzer,span)特性为用户提供了一种功能强大的故障诊断方式。该特性可以将被调查端口发送或接收的报文拷贝到span端口。span端口在缺省情况下被禁止,因此在使用时要进行相应的配置。 例如 连接端口6/9的工作站发生故
一台4506switch,通过trunk口和3550连接,在3550下再通过trunk接6台交换机!具体配置如下:4506:在int gi4/1上做trunk,encapsulation dot1qvtp domain ciscovtp mode server划分了10个vlan3550:做了6个t
1.在基于IOS的交换机上设置主机名/系统名: switch(config)# hostname hostname 在基于CLI的交换机上设置主机名/系统名: switch(enable) set system name name-string 2.在基于IOS的交换机上设置登录口令: switch
ietobe() hostname router2!username allusername router1 password foo<-- for CHAP athentication!isdn switch-type basic-net3!interface Ethernet0ip add
一、概述 交换技术是一个具有简化、低价、高性能和高端口密集特点的交换产品,体现了桥接技术的复杂交换技术在OSI参考模型的第二层操作。与桥接器一样,交换机按每一个包中的MAC地址相对简单地决策信息转发。而这种转发决策一般不考虑包中隐藏的更深的其他信息。与桥接器不同的是交换机转发延迟很小,操作接近单个
1.方案1——基于端口的MAC地址绑定 思科2950交换机为例,登录进入交换机,输入管理口令进入配置模式,敲入命令: Switch#config terminal #进入配置模式 Switch(config)# Interface fastethernet 0/1 #进入具体端口配置模
41. 配置默认路由: switch(enable) set ip route default gateway 42. 为一个路由处理器分配VLANID,可在接口模式下使用下列命令: router(config)# interface interface number router(
20. 为了将交换机配置成一个集群的命令交换机,首先要给管理接口分配一个IP地址,然后使用下列命令:switch(config)# cluster enable cluster-name 21. 为了从一条中继链路上删除VLAN,可使用下列命令: switch(enable) clear t