Windows Route 路由表命令整理
Windows Route 路由表命令 在本地 IP 路由表中显示和修改条目。 语法 route [-f] [-p] [Command [Destination] [mask Netmask] [Gateway] [metric Metric]] [if Interface]] 参数 -f 清除所有
Windows Route 路由表命令 在本地 IP 路由表中显示和修改条目。 语法 route [-f] [-p] [Command [Destination] [mask Netmask] [Gateway] [metric Metric]] [if Interface]] 参数 -f 清除所有
核心代码一:strIPAddress = Array("192.168.0.148") strSubnetMask = Array("255.255.255.0") strGateway = Array("192.168.0.1") strGatewayMetric = Array(1) arrDN
1、运行命令ifconfig查看当前网卡列表,确定名称,如果不在列表内,可能是驱动没装好 % ifconfig dc0: flags=8843 mtu 1500 inet 192.168.1.3 netmask 0xffffff00 broadcast 192.168.1.255 ether 00:
Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.123.254 192.168.123.88 1 0.0.0.0 0.0.0.0 192.168.123.254 1
NAT Routerip nat pool test 172.16.131.2 172.16.131.10 netmask 255.255.255.0ip nat inside source list 7 pool testip nat inside source static 10.10.10.1
高层链路控制HDLC的配置 操作步骤:进入全局配置状态 config term进入端口配置状态 interface serial slot/position设置HDLC的帧类型 encapsulation hdlc设置IP地址及其子网掩码 ip address ip-address netmask