package testreg;
import java.util.regex.Matcher;
import java.util.regex.Pattern;

/**
* <p>Title: 正则表达式的研究</p>
* <p>Description:
* 最近在工作中常常用到一些正则表达式的使用问题,到网上去找介绍大多是一鳞半爪。求人不如
* 求已。一狠心,自己看!这两天利用我们项目两期之间的一点空闲对J2SE所支持的正则表达式来
* 了个彻底研究!代价是……就是浪废了部门近十二张白纸。闲话少说,书归正传。
* 原理:
*     正则表达式的原理是有限状态自动机,自动机内部有有限个状态,有一个初始状态,有一个
* 结束状态。自动机根据输入和自身内部的当前状态来决定下一步于什么。呵呵,这是很久以前学
* 的东东了也记不清了,大家只作参照吧。
* Java中的正则表达式:
*     从J2SE1.4起Java增加了对正则表达式的支持就是java.util.regex包,这个包中主要有
* 3个类:Pattern,代表模式,就是正则表达式自身,Matcher,是一个有限状态自动机,其实大多
* 数的活还是让Pattern类于了,Matcher往往只是简单的调用Pattern,不知道这是什么模式。这
* 两个类写的都很经典,还有不少算法在内值得有功力的人仔细研究一下。另一个是一个异常类当所
* 用正则表达式不正确时抛出,是运行时异常。
* 几个难点:
*   1.line terminator
*     line terminator 中文意终结符,是指一个或两个字符组成的字符序列。java中的
*     所有line terminator:
*     A newline (line feed) character ('\n'),
*      -----------换行符(0A)
*     A carriage-return character followed immediately by a newline character ("\r\n"),
*      -----------回车+换行(0D0A)
*     A standalone carriage-return character ('\r'),
*      -----------回车(0D)
*     A next-line character ('\u0085'),
*      ------------下一行符?(?表示我也不知道是什么,请大家明白的给我发mail
*     A line-separator character ('\u2028'), or
*      ------------行分隔符?
*     A paragraph-separator character ('\u2029).
*      ------------段落分隔符?
*      If UNIX_LINES mode is activated, then the only line terminators recognized are newline characters.
*      如果使用unix模式则只有\n被认为是line terminator,也就是在使用pattern时如下:
*      Pattern p=Pattern.compile("正则表达式",Pattern.UNIX_LINE);
*      或 Pattern p=Pattern.compile("(?d)正则表达式")
*      "."匹配除line terminator以外的所有字符(未指定DOTALL时)
*      在指定DOTAll模式时"."匹配所有字符
*   2.Quantifiers,Greedy,Reluctant and Possessive.
*     这几个词不太好译,原文是Greedy Quantifiers,Reluctant Quantifiers and Possessive
*     Quantifiers凭我这点英语我只好译作贪婪的量子,不情愿的量子和占有欲强的量子?这也太搞笑了,
*     好在我理解了他们的意思。这点等下我细说。
*   3. 对于[a-zA-Z],[a-d[h-i]],[^a-f],[b-f&&[a-z]],[b-f&&[^cd]]等形式的理解
*     对于上述,原文用range,union,negation,intersection,subtraction等来描述
*     range表是范围,union是并集,negation是取反,intersection是交集,subtraction
*     是……是减法??反正是减去一部分的意思
*     range       a-z 从a到z的小写字母
*     negation    [^a-f]除了a-f之外所有的,全集是所有字符
*     union       [a-d[h-i]] a-d并h-i
*     subtraction [b-f&&[^cd]] 就是b-f中除了cd以外的都是
*     intersection[b-f&&[a-z]] 就是b-f与a-z中的公共部分
*     我总结了一下,其实就是方括号表示一个集合,集合中的元素用列举法表示如[abcd],但太多
*     了怎么为?总不能把从a到z的全列举吧?那就用a-z表示且省略了方括号,交集用&&表示,并集
*     省略,差集(对subtraction译成差集还差不多)用交集和取反来表示。所以,以上的可表示为:
*     [[a-z][A-Z]],[[a-d][h-i]],[^a-f],[[b-f]&&[a-z]],[[b-f]&&[^cd]]
*     这样是不是和我们的习惯相符了.
*   4.各个标志的意义
*     在生成pattern时可以同时使用几个标志来指定进行匹配时的方案。
*     用法形如:Pattern p=Pattern.compile(".*a?",Pattern.UNIX_LINES);
*     当同时指定多个标志时可以使用"|"操作符连接如:
*     Pattern p=Pattern.compile(".*a?,Pattern.UNIX_LINES|Pattern.DOTALL);
*     也可以在表达式中指定如:
*     Pattern p=Pattern.compile("(?d).*a?");
*     Pattern p=Pattern.compile("(?d)(?s).*a?");
*     以上两个定义和前面两个对应等价
*     所有的标志如下:
*     Constant               Equivalent Embedded Flag Expression 
     Pattern.CANON_EQ              None Enables canonical equivalence
     Pattern.CASE_INSENSITIVE      (?i) Enables case-insensitive matching
     Pattern.COMMENTS              (?x) Permits whitespace and comments in pattern.
     Pattern.MULTILINE             (?m) Enables multiline mode.
     Pattern.DOATALL               (?s) Enables dotall mode
     Pattern.UNICODE_CASE          (?u) Enables Unicode-aware case folding.
     Pattern.UNIX_LINES            (?d) Enables Unix lines mode

     CANON_EQ 指定使用规范等价模式?这个我理解的也有限,是不是说只要指定了这个模式则
     ascii码的'a'就可以和unicode的'a'还有XXX码的'a'相等?请教各位。(mail to me)

     CASE_INSENSITIVE 指定使用大小写不敏感的匹配模式,这个好理解,但要注意这个标志只是
     对ascii码有效,要使unicode在比较时也忽略大小写要同时指定UNICODE_CASE,就是要指定
     CASE_INSENSITIVE|UNICODE_CASE或使用(?i)(?u)

     COMMENTS 指定使用注释和忽略空白,也就是".*a"==".  *a #this is comments"我想这个
*     在正则表达式很大,而且是在文件中输入时比较有用,平时我看也用不上。
*     
*     MULTILINE In multiline mode the expressions ^ and $ match just after 
*     or just before, respectively, a line terminator or the end of the 
*     input sequence. By default these expressions only match at the beginning 
*     and the end of the entire input sequence
*     指定使用多行匹配模式,在默认模式下,^和$分别只匹配一个输入的开始和结束。
*     在这种模式下,^和$ 除了匹配整个输入的开始和结束外还匹配一个line terminator的后边和
*     前边(不是前边和后边,就是说^匹配line terminator的后边$匹配line terminator的前边。
*     
*     DOATALL 如指定了这个模式则"."可匹配任何字符包括line terminator
*     
*     UNIX_LINES 指定这个模式时只有\n被认为是line terminator而\r和\r\n都不是

*  其他的我一时想不起来了,在具体介绍时再说吧。
* </p>
*/
public class TestReg2
{

   public static void main(String[] args)
   {
       String str1 = "";
       Object str = "";
       //注意:\r,\n,\b等转义字符在java字符串常量中要写成\\r,\\n,\\b等,否则编译都过不去
       //\s匹配\r,\n,\r和空格
       System.out.println("\\s匹配\\r,\\n,\\r和空格 "+" \t\n\r".matches("\\s{4}"));
       //\S和\s互逆
       System.out.println("\\S和\\s互逆 "+"/".matches("\\S"));
       //.不匹配\r和\n
       System.out.println(".不匹配\\r和\\n "+"\r".matches("."));
       System.out.println("\n".matches("."));

       //\w匹配字母,数字和下划线
       System.out.println("\\w匹配字母,数字和下划线  "+"a8_".matches("\\w\\w\\w"));
       //\W和\w互逆
       System.out.println("\\W和\\w互逆 "+"&_".matches("\\W\\w"));
       //\d匹配数字
       System.out.println("\\d匹配数字 "+"8".matches("\\d"));
       //\D与\d互逆
       System.out.println("\\D与\\d互逆"+"%".matches("\\D"));
       //两者都匹配但意文不同
       System.out.println("======================");
       System.out.println("表示\\000a匹配\\000a "+"\n".matches("\n"));
       System.out.println("表示\\n匹配换行 "+"\n".matches("\\n"));
       System.out.println("======================");
       //两者都匹配但意文不同
       System.out.println("\r".matches("\r"));
       System.out.println("\r".matches("\\r"));
       System.out.println("======================");
       //^匹配开头
       System.out.println("^匹配开头"+"hell".matches("^hell"));
       System.out.println("abc\nhell".matches("^hell"));
       //$匹配结束
       System.out.println("$匹配结束"+"my car\nabc".matches(".*ar$"));
       System.out.println("my car".matches(".*ar$"));
       //\b匹配界
       System.out.println("\\b匹配界 "+"bomb".matches("\\bbom."));
       System.out.println("bomb".matches(".*mb\\b"));
       //\B与\b互逆
       System.out.println("\\B与\\b互逆"+"abc".matches("\\Babc"));

       //[a-z]匹配a到z的小写字母
       System.out.println("[a-z]匹配a到z的小写字母"+"s".matches("[a-z]"));
       System.out.println("S".matches("[A-Z]"));
       System.out.println("9".matches("[0-9]"));

       //取反
       System.out.println("取反"+"s".matches("[^a-z]"));
       System.out.println("S".matches("[^A-Z]"));
       System.out.println("9".matches("[^0-9]"));

       //括号的作用
       System.out.println("括号的作用"+"aB9".matches("[a-z][A-Z][0-9]"));
       System.out.println("aB9bC6".matches("([a-z][A-Z][0-9])+"));
       //或运算
       System.out.println("或运算"+"two".matches("two|to|2"));
       System.out.println("to".matches("two|to|2"));
       System.out.println("2".matches("two|to|2"));

       //[a-zA-z]==[a-z]|[A-Z]
       System.out.println("[a-zA-z]==[a-z]|[A-Z]"+"a".matches("[a-zA-Z]"));
       System.out.println("A".matches("[a-zA-Z]"));
       System.out.println("a".matches("[a-z]|[A-Z]"));
       System.out.println("A".matches("[a-z]|[A-Z]"));

       //体会一下以下四个
       System.out.println("体会一下以下四个\n==========================");
       System.out.println(")".matches("[a-zA-Z)]"));
       System.out.println(")".matches("[a-zA-Z)_-]"));
       System.out.println("_".matches("[a-zA-Z)_-]"));
       System.out.println("-".matches("[a-zA-Z)_-]"));
       System.out.println("==========================");
       System.out.println("b".matches("[abc]"));
       //[a-d[f-h]]==[a-df-h]
       System.out.println("[a-d[f-h]]==[a-df-h]"+"h".matches("[a-d[f-h]]"));
       System.out.println("a".matches("[a-z&&[def]]"));
       //取交集
       System.out.println("取交集"+"a".matches("[a-z&&[def]]"));
       System.out.println("b".matches("[[a-z]&&[e]]"));
       //取并
       System.out.println("取并"+"9".matches("[[a-c][0-9]]"));
       //[a-z&&[^bc]]==[ad-z]
       System.out.println("[a-z&&[^bc]]==[ad-z]"+"b".matches("[a-z&&[^bc]]"));
       System.out.println("d".matches("[a-z&&[^bc]]"));
       //[a-z&&[^m-p]]==[a-lq-z]
       System.out.println("[a-z&&[^m-p]]==[a-lq-z]"+"d".matches("[a-z&&[^m-p]]"));
       System.out.println("a".matches("\\p{Lower}"));
       ///注意以下体会\b的用法(注意,在字符串常量中十目直接写\b表退格,所以要写\\b
       System.out.println("*********************************");
       System.out.println("aawordaa".matches(".*\\bword\\b.*"));
       System.out.println("a word a".matches(".*\\bword\\b.*"));
       System.out.println("aawordaa".matches(".*\\Bword\\B.*"));
       System.out.println("a word a".matches(".*\\Bword\\B.*"));
       System.out.println("a word a".matches(".*word.*"));
       System.out.println("aawordaa".matches(".*word.*"));
       //体会一下组的用法
       //组的顺序,只数"("第一个为第一组第二个是第二组……
       //第0组表示整个表达式
       System.out.println("**************test group**************");
       Pattern p = Pattern.compile("(([abc]+)([123]+))([-_%]+)");
       Matcher m = p.matcher("aac212-%%");
       System.out.println(m.matches());
       m = p.matcher("cccc2223%_%_-");
       System.out.println(m.matches());
       System.out.println("======test group======");
       System.out.println(m.group());
       System.out.println(m.group(0));
       System.out.println(m.group(1));
       System.out.println(m.group(2));
       System.out.println(m.group(3));
       System.out.println(m.group(4));
       System.out.println(m.groupCount());
       System.out.println("========test end()=========");
       System.out.println(m.end());
       System.out.println(m.end(2));
       System.out.println("==========test start()==========");
       System.out.println(m.start());
       System.out.println(m.start(2));
       //test backslash测试反向引用?
       Pattern pp1=Pattern.compile("(\\d)\\1");//这个表达式表示必须有两相同的数字出现
       //\1表示引用第一个组\n表示引用第n个组(必须用\\1而不能用\1因\1在字符串中另有意义(我也知道是什么)
       Matcher mm1=pp1.matcher("3345");//33匹配但45不匹配
       System.out.println("test backslash测试反向引用");
       System.out.println(mm1.find());
       System.out.println(mm1.find());

       //体会以下不同
       System.out.println("==============test find()=========");
       System.out.println(m.find());
       System.out.println(m.find(2));

       System.out.println("这是从第三个字符(index=2)开始找的group结果");
       System.out.println(m.group());
       System.out.println(m.group(0));
       System.out.println(m.group(1));
       System.out.println(m.group(2));
       System.out.println(m.group(3));
       m.reset();
       System.out.println(m.find());
       //测试一个模式可多次匹配一个串
       System.out.println("测试一个模式可多次匹配一个串");
       Pattern p1 = Pattern.compile("a{2}");
       Matcher m1 = p1.matcher("aaaaaa");
       //这说明Matcher的matchs()方法是对事个字符串的匹配,
       System.out.println(m1.matches());
       System.out.println(m1.find());
       System.out.println(m1.find());
       System.out.println(m1.find());
       System.out.println(m1.find());
       //再测试matchs()
       System.out.println("再测试matchs()");
       Pattern p2 = Pattern.compile("(a{2})*");
       Matcher m2 = p2.matcher("aaaa");
       System.out.println(m2.matches());
       System.out.println(m2.matches());
       System.out.println(m2.matches());
       //所以find是在一个串中找有没有对应的模式,而matchs是完全匹配
       //test lookupat()
       System.out.println("test lookupat()");
       Pattern p3 = Pattern.compile("a{2}");
       Matcher m3 = p3.matcher("aaaa");
       System.out.println(p3.flags());
       System.out.println(m3.lookingAt());
       System.out.println(m3.lookingAt());
       System.out.println(m3.lookingAt());
       //总结以上matchs()是整个匹配且总是从头开始,find是部分匹配且从上一次匹配结束时开始找
       //lookingAt也是从头开始,但是部分匹配
       System.out.println("======test 空白行========");
       System.out.println("         \n".matches("^[ \\t]*$\\n"));

       //演示appendXXX的用法
       System.out.println("=================test append====================");
       Pattern p4 = Pattern.compile("cat");
       Matcher m4 = p4.matcher("one cat two cats in the yard");
       StringBuffer sb = new StringBuffer();
       boolean result = m4.find();
       int i=0;
       System.out.println("one cat two cats in the yard");
       while(result)
       {m4.appendReplacement(sb, "dog");
       System.out.println(m4.group());
       System.out.println("第"+i+++"次:"+sb.toString());
       result = m4.find();
       }
       System.out.println(sb.toString());
       m4.appendTail(sb);
       System.out.println(sb.toString());

       //test UNIX_LINES
       System.out.println("test UNIX_LINES");
       Pattern p5=Pattern.compile(".",Pattern.UNIX_LINES);
       Matcher m5=p5.matcher("\n\r");
       System.out.println(m5.find());
       System.out.println(m5.find());

       //test UNIX_LINES
       System.out.println("test UNIX_LINES");
       Pattern p6=Pattern.compile("(?d).");
       Matcher m6=p6.matcher("\n\r");
       System.out.println(m6.find());
       System.out.println(m6.find());

       //test UNIX_LINES
       System.out.println("test UNIX_LINES");
       Pattern p7=Pattern.compile(".");
       Matcher m7=p7.matcher("\n\r");
       System.out.println(m7.find());
       System.out.println(m7.find());

       //test CASE_INSENSITIVE
       System.out.println("test CASE_INSENSITIVE");
       Pattern p8=Pattern.compile("a",Pattern.CASE_INSENSITIVE);
       Matcher m8=p8.matcher("aA");
       System.out.println(m8.find());
       System.out.println(m8.find());
       System.out.println("test CASE_INSENSITIVE");
       Pattern p9=Pattern.compile("(?i)a");
       Matcher m9=p9.matcher("aA");
       System.out.println(m9.find());
       System.out.println(m9.find());
       System.out.println("test CASE_INSENSITIVE");
       Pattern p10=Pattern.compile("a");
       Matcher m10=p10.matcher("aA");
       System.out.println(m10.find());
       System.out.println(m10.find());

       //test COMMENTS
       System.out.println("test COMMENTS");
       Pattern p11=Pattern.compile(" a a #ccc",Pattern.COMMENTS);
       Matcher m11=p11.matcher("aa a a #ccc");
       System.out.println(m11.find());
       System.out.println(m11.find());
       System.out.println("test COMMENTS");
       Pattern p12 = Pattern.compile("(?x) a a #ccc");
       Matcher m12 = p12.matcher("aa a a #ccc");
       System.out.println(m12.find());
       System.out.println(m12.find());

       //test MULTILINE这个大家多试试参照我上面对多行模式的理解
       System.out.println("test MULTILINE");
       Pattern p13=Pattern.compile("^.?",Pattern.MULTILINE|Pattern.DOTALL);
       Matcher m13=p13.matcher("helloohelloo,loveroo");
       System.out.println(m13.find());
       System.out.println("start:"+m13.start()+"end:"+m13.end());
       System.out.println(m13.find());
       //System.out.println("start:"+m13.start()+"end:"+m13.end());
       System.out.println("test MULTILINE");
       Pattern p14=Pattern.compile("(?m)^hell.*oo$",Pattern.DOTALL);
       Matcher m14=p14.matcher("hello,Worldoo\nhello,loveroo");
       System.out.println(m14.find());
       System.out.println("start:"+m14.start()+"end:"+m14.end());
       System.out.println(m14.find());
       //System.out.println("start:"+m14.start()+"end:"+m14.end());
       System.out.println("test MULTILINE");
       Pattern p15=Pattern.compile("^hell(.|[^.])*oo$");
       Matcher m15=p15.matcher("hello,Worldoo\nhello,loveroo");
       System.out.println(m15.find());
       System.out.println("start:"+m15.start()+"end:"+m15.end());
       System.out.println(m15.find());
      // System.out.println("start:"+m15.start()+"end:"+m15.end());

       //test DOTALL
       System.out.println("test DOTALL");
       Pattern p16=Pattern.compile(".",Pattern.DOTALL);
       Matcher m16=p16.matcher("\n\r");
       System.out.println(m16.find());
       System.out.println(m16.find());

       System.out.println("test DOTALL");
       Pattern p17=Pattern.compile(".");
       Matcher m17=p17.matcher("\n\r");
       System.out.println(m17.find());
       System.out.println(m17.find());

       System.out.println("test DOTALL");
       Pattern p18=Pattern.compile("(?s).");
       Matcher m18=p18.matcher("\n\r");
       System.out.println(m18.find());
       System.out.println(m18.find());

       //test CANON_EQ这个是jdk的例子但我实在不明白是什么意思,向大家请教
       System.out.println("test CANON_EQ");
       Pattern p19=Pattern.compile("a\u030A",Pattern.CANON_EQ);
       System.out.println(Character.getType('\u030A'));
       System.out.println("is"+Character.isISOControl('\u030A'));
       System.out.println("is"+Character.isUnicodeIdentifierPart('\u030A'));
       System.out.println(Character.getType('\u00E5'));
       System.out.println("is"+Character.isISOControl('\u00E5'));
       Matcher m19=p19.matcher("\u00E5");
       System.out.println(m19.matches());
       System.out.println(Character.getType('\u0085'));
       System.out.println("is"+Character.isISOControl('\u0085'));

      //注意下面三个例子体会Greedy,Reluctant and Possessive Quantifiers的不同
       Pattern ppp=Pattern.compile(".*foo");
       Matcher mmm=ppp.matcher("xfooxxxxxxfoo");
       /**
        * Greedy   quantifiers 
           X?      X, once or not at all 
           X*      X, zero or more times 
           X+      X, one or more times 
           X{n}    X, exactly n times 
           X(n,}   X, at least n times 
           X{n,m}  X, at least n but not more than m times 
           Greedy quantifiers是最常用的一种,如上,它的匹配方式是先匹配尽可能多的字符,当
           这样造成整个表达式整体不能匹配时就退一个字符再试比如:
           .*foo与xfooxxxxxxfoo的匹配过程,.*先与整个输入匹配,发现这样不行,整个串不能匹配
        *  于是退最后一个字符"o"再试,还不行,再退直到把foo都退出才发现匹配于是结束。因为这个过程
        *  总是先从最大匹配开始到找到一个匹配,所以.*与之匹配的总是一个最大的,这个特点和资本家相似
        *  故名贪婪的
        */
       boolean isEnd=false;
       int k=0;
       System.out.println("==========");
       System.out.println("xfooxxxxxxfoo");
       while(isEnd==false)
       try{
           System.out.println("the:"+k++);
           System.out.println(mmm.find());
           System.out.println(mmm.end());
       }catch(Exception e){
           isEnd=true;
       }
       isEnd=false;
       Pattern ppp1=Pattern.compile(".*?foo");
       Matcher mmm1=ppp1.matcher("xfooxxxxxxfoo");
       /**
        * Reluctant quantifiers 
           X??       X, once or not at all 
           X*?       X, zero or more times 
           X+?       X, one or more times 
           X{n}?     X, exactly n times 
           X(n,}?    X, at least n times 
           X{n,m}?   X, at least n but not more than m times 
           Reluctant quantifiers的匹配方式正好相反,它总是先从最小匹配开始,如果这时导致
           整个串匹配失败则再吃进一个字符再试,如:
           .*?foo与xfooxxxxxxfoo的匹配过程,首先,.*与空串匹配,这时整个串匹配失败,于是
        *  再吃一个x,这时发现整个串匹配成功,当再调用find时从上次匹配结束时开始找,先吃一个
        *  空串,不行,再吃一个x,不行,……直到把中间所有x都吃掉才发现匹配成功。这种方式总
        *  是从最小匹配开始所以它能找到最多次数的匹配,但第一匹配都是最小的。它的行为有点象雇佣
        *  工人,总是尽可能少的于活,故名勉强的。
        */
       k=0;
       System.out.println("?????????????????????");
       System.out.println("xfooxxxxxxfoo");
       while(isEnd==false)
       try{
           System.out.println("the:"+k++);
           System.out.println(mmm1.find());
           System.out.println(mmm1.end());
       }catch(Exception e){
           isEnd=true;
       }
       isEnd=false;
       Pattern pp2=Pattern.compile(".*+foo");
       Matcher mm2=pp2.matcher("xfooxxxxxxfoo");
       /**
        * 
           Possessive quantifiers 
           X?+        X, once or not at all 
           X*+        X, zero or more times 
           X++        X, one or more times 
           X{n}+      X, exactly n times 
           X(n,}+     X, at least n times 
           X{n,m}+    X, at least n but not more than m times 
           Possessive quantifiers 这种匹配方式与Greedy方式相似,所不同的是它不够聪明,当
           它一口吃掉所有可以吃的字符时发现不匹配则认为整个串都不匹配,它不会试着吐出几个。它的行
           为和大地主相似,贪婪但是愚蠢,所以名曰强占的。
        */

       int ii=0;
       System.out.println("+++++++++++++++++++++++++++");
       System.out.println("xfooxxxxxxfoo");
       while(isEnd==false)
       try{
           System.out.println("the:"+ii++);
           System.out.println(mm2.find());
           System.out.println(mm2.end());
       }catch(Exception e){
           isEnd=true;
       }  
   } 
}

以上就是【java正则表达式彻底研究】的全部内容了,欢迎留言评论进行交流!

赞(0) 踩(0)

与本文相关的软件

发表我的评论

最新评论

  1. 暂无评论