代码一：
'*******************************************************************************************
'Version:3.1
' 调整错误处理方法，错误信息输出到LogFile文件，可以查看扫描失败原因
' 如果出现“RPC 服务器不可用”错误，是因为远程主机没开机
' 如果出现“RPC 服务器不可用”之外的错误，可能是由于正在运行的程序造成，请你把此信息告诉我
' 重启后再次扫描就可以排除非“RPC 服务器不可用。”的错误
' 如果扫描到的硬件信息为空，应该是驱动问题(或BIOS不完善)，请自行解决
'Version:3.0
' 增加输出BIOS的发行日期，和主板信息放在一起
'Version:2.9
' 修正所有GetInfo过程遇错的处理方法,避免返回的数组上限不符合输出要求导致脚本报错。
' 之所以为出现这种情况，是因为Win32类检索不到硬件或连接到Win32类失败；
' 原来判断是否出现Err，忽略了检索不到硬件的情况(连接成功无Err,Count为0)
' 检索不到硬件多数是因为驱动没装好
'Version:2.8
' 增加GetIDEProtocol过程，获取IDE控制器使用的协议，只是增加了代码，没有调用
' 计划增加检索其它存储器控制器的过程
'Version:2.7
' 检索硬盘/显卡/网卡/声卡的过程增加 DeviceID 属性(设备标识符)
' 此属性不被输出，用于脚本内部判断
'Version:2.6
' 原来输出搜索到的第一个硬盘
' 改为输出搜索到的第一个InterfaceType属性为IDE的硬盘的信息
'Version:2.5
' 增加Sort过程，排序硬件信息
'Version:2.4
' 调整输出信息的分类，同类信息尽可能的只使用一个逗号分隔，以便导入xls后在同一列
' 查询到的硬件信息如果是空或0，有可能是相关驱动不完善或未定义此信息，也可能是未安装驱动
' 因为WMI查询就代表了系统知道这些硬件的详细信息，查不到信息就是系统不知道
' 系统不知道硬件的详细信息，代表着性能可能有所缺失，建议找个好驱动安装
' 值得注意的是主板驱动
' (为了更容易理解，此版本的升级信息被编辑过)
'Version:2.3
' 取消2.2版增加输出的硬盘接口类型
' 由于STAT也归于IDE接口，这会导致误解
' PS：脚本只输出搜索到的第一个硬盘
'Version:2.2
' GetMemoryInfo过程增加MemoryType、FormFactor、TypeDetail三个属性
' 输出增加内存类型、封装类型
' 输出增加硬盘容量、接口类型
'Version:2.1
' GetOSInfo过程增加去掉Caption属性中带有的逗号“,”的代码
' 原因：在检测2003系统时，读取到的Caption属性，带有逗号“,”
' 这会影响输出，因为输出是以逗号“,”为分隔符的
'Version:2.0 B5发布版
' GetNetworkInfo过程改为使用MACAddress属性非空、
' Manufacturer属性非"Microsoft"判断网卡
'Version:2.0 Beta4
' GetNetworkInfo过程使用NetConnectionStatus属性判断网络适配器
' NetConnectionStatus属性表明连接状态(2000系统不支持此属性)
' 物理网络适配器才具有此状态(包括停用状态在内)
'Version:2.0 Beta3
' GetNetworkInfo过程增加一个判断
' 忽略读取IPAddress(0)时会产生Err类型数据的适配器(对战平台)
'Version:2.0 Beta2
' GetOSInfo过程原来使用的Name、ServicePackMajorVersion属性
' 改为使用Caption、CSDVersion属性
' 所有GetInfo过程增加错误处理代码，避免正在扫描的时候
' 脚本遇到运行时错误导致脚本退出
'Version:2.0 Beta1
' 增加扫描失败记录，再次运行脚本只读取失败记录，忽略配置信息
'Version:1.1
' GetNetworkInfo过程增加一个判断
' 忽略NetConnectionID属性(接口名称)为空的适配器
'Version:1.0
' 初始版本
Option Explicit
'**************************************
'作 者: LZ-MyST QQ:8450919
'http://hi.baidu.com/lzmyst
'http://www.clxp.net.cn
'E-Mail:lzmyst@163.com
'你可以任意编辑、引用脚本的全部或部分代码
'转贴、引用脚本的全部或部分代码请保留版权
'**************************************
'********************************说明开始*************************************
'Input格式：起始IP-数量=用户名=密码;起始计算机名-数量=用户名=密码
' 多个配置项用“;”隔开
'例：192.168.0.1-10指明IP范围为192.168.0.1~192.168.0.10，支持跨网段
'例：PC001-10指明范围为PC001~PC010(计算机名可以包含-号)
'与指定格式不相同的，默认为单IP[计算机名],也可以在"未扫描的计算机.txt"里配置
'"硬件信息.txt"是以逗号分隔各项硬件信息，你需要自己导入XLS整理、精简
'未扫描到的计算机，会把机号、用户名、密码保存到"未扫描的计算机.txt"
'再次运行脚本将只读取"未扫描的计算机.txt"里的信息(如果存在并且大小不为0)
'********************************说明结束*************************************
Dim Input, InfoOutFile, LogFile '请按格式给Input赋值
'Input = "pc021=administrator=cylslynetbar"
Input = "PC001-109=administrator=cylslynetbar;pc110-85=administrator=LYjfnetbaradmin"
InfoOutFile = "硬件信息.txt"
LogFile = "未扫描的计算机.txt"
Redim arrConfig(0)
Dim WshShell, FSO, intCount1, intCount2
intCount1 = 0
intCount2 = 0
Set WshShell = WScript.CreateObject("WScript.Shell")
Set FSO = WScript.Createobject("Scripting.Filesystemobject")
ReadConfig
WshShell.Popup "扫描过程会很慢，请耐心等待，完成后会给出提示",,"扫描开始"
LinkRemoteServer arrConfig
Dim LenNum1, LenNum2
If intCount1 > intCount2 Then
LenNum1 = 0
LenNum2 = Len(intCount1) - Len(intCount2)
Else
LenNum1 = Len(intCount2) - Len(intCount1)
LenNum2 = 0
End If
Sort InfoOutFile
WshShell.Popup "扫描结果：" & _
vbCrLf & vbTab & "扫描成功：" & Space(LenNum1) & intCount1 & " 台" & _
vbCrLf & vbTab & "扫描失败：" & Space(LenNum2) & intCount2 & " 台" & _
vbCrLf & "扫描失败的电脑已做记录，再次运行脚本只扫描记录里的电脑",,"扫描完成"
Function ReadConfig
Dim objMatches, objMatche,objLogFile, arrLog, intUBarrConfig
If FSO.FileExists(LogFile) Then
If FSO.GetFile(LogFile).Size = 0 Then
Set objMatches = GetMatche("([^;=]+)=([^;=]+)=([^;=]+)", Input)
For Each objMatche In objMatches
GetConfig objMatche.SubMatches(0), objMatche.SubMatches(1), objMatche.SubMatches(2)
Next
If objMatches.Count = 0 Then
Msgbox "配置信息格式不正确，请修改"
WScript.Quit
End If
Else
Set objLogFile = FSO.OpenTextFile(LogFile)
Do Until objLogFile.AtEndOfStream
arrLog = Split(objLogFile.ReadLine,"=")
intUBarrConfig = ((Ubound(arrConfig)+1)\3+1)*3-1
Redim Preserve arrConfig(intUBarrConfig)
arrConfig(intUBarrConfig-2) = arrLog(0)
arrConfig(intUBarrConfig-1) = arrLog(1)
arrConfig(intUBarrConfig-0) = arrLog(2)
Loop
End If
Else
Set objMatches = GetMatche("([^;=]+)=([^;=]+)=([^;=]+)", Input)
For Each objMatche In objMatches
GetConfig objMatche.SubMatches(0), objMatche.SubMatches(1), objMatche.SubMatches(2)
Next
If objMatches.Count = 0 Then
Msgbox "配置信息格式不正确，请修改"
WScript.Quit
End If
End If
End Function
'*********************************************************************************
'目的：连接到远程主机的WMI命名空间
'输入：arrArray数组，包含有计算机名[IP]、用户名、密码
'调用：LinkServer过程
' 如果返回SWbemLocator对象ConnectServer方法的实例，调用OutInfo过程
' 如果返回Err信息(字符串类型)，输出计算机名[IP]、用户名、密码及错误信息到LogFile文件
' OutInfo过程
' 如果返回Err信息(字符串类型)输出计算机名[IP]、用户名、密码及错误信息到LogFile文件
'传递：SWbemLocator对象ConnectServer方法的实例传递给OutInfo过程
' 计算机名[IP]、命名空间、用户名、密码传递给LinkServer过程
'*********************************************************************************
Function LinkRemoteServer(arrArray)
Dim objErrLog, E, objLinkServer, objConnection, objWbemLocator, objErr
Set objWbemLocator = CreateObject("WbemScripting.SWbemLocator")
Set objErrLog = FSO.CreateTextFile(LogFile,True)
For E = 0 To Ubound(arrArray) Step 3
Set objLinkServer = LinkServer(arrConfig(E),"root\cimv2",arrConfig(E+1),arrConfig(E+2))
If Err Then
objErrLog.Writeline arrArray(E) & "=" & arrArray(E+1) & "=" & arrArray(E+2) & "=" & _
"错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By LinkServer Function"
intCount2 = intCount2 + 1
Err.Clear
Else
objErr = OutInfo(objLinkServer)
If Vartype(objErr) = 8 Then
objErrLog.Writeline arrArray(E) & "=" & arrArray(E+1) & "=" & arrArray(E+2) & "=" & objErr
intCount2 = intCount2 + 1
End If
End If
Next
End Function
'******************************************************
'目的：输出硬件信息
'输入：SWbemLocator对象ConnectServer方法的实例
'调用：获取硬件信息的GetXXXInfo过程
'传递：SWbemLocator对象ConnectServer方法的实例
'返回：所有调用的GetInfo过程都未返回Err对象，则返回True
' 某个GetInfo过程返回Err对象，则返回False
'******************************************************
Function OutInfo(objRemote)
Dim OutFile, arrInfo, strOutInfo, Tmp, A
If FSO.FileExists(InfoOutFile) Then
Set OutFile = FSO.OpenTextFile(InfoOutFile,8)
Else
Set OutFile = FSO.CreateTextFile(InfoOutFile)
OutFile.Writeline "计算机名,系统(初装日期),主板型号(厂商)(发行日期),CPU型号(接口类型),外频,L2容量(速度)," & _
"内存总量,内存速度(位置),内存类型(封装类型),硬盘型号(容量),显卡型号(显存),网卡,IP/MAC"
End If
'系统
arrInfo = GetOSInfo(objRemote)
If Vartype(arrInfo) = 8 Then
OutInfo = arrInfo
Exit Function
End If
strOutInfo = arrInfo(0) & "," & arrInfo(1) & "(" & arrInfo(2) & "),"
'主板
arrInfo = GetBoardInfo(objRemote)
If Vartype(arrInfo) = 8 Then
OutInfo = arrInfo
Exit Function
End If
strOutInfo = strOutInfo & arrInfo(0) & "(" & arrInfo(1) & ")"
'BIOS
arrInfo = GetBIOSInfo(objRemote)
If Vartype(arrInfo) = 8 Then
OutInfo = arrInfo
Exit Function
End If
strOutInfo = strOutInfo & "(" & arrInfo(2) & "),"
'CPU
arrInfo = GetCPUInfo(objRemote)
If Vartype(arrInfo) = 8 Then
OutInfo = arrInfo
Exit Function
End If
strOutInfo = strOutInfo & arrInfo(1) & "(" & arrInfo(8) & ")," & arrInfo(4) & "," & _
arrInfo(6) & "(" & arrInfo(7) & "),"
'内存
arrInfo = GetMemoryInfo(objRemote)
If Vartype(arrInfo) = 8 Then
OutInfo = arrInfo
Exit Function
End If
Tmp = 0
For A = 1 To Ubound(arrInfo) Step 6
Tmp = Tmp + Cint(arrInfo(A))
Next
strOutInfo = strOutInfo & arrInfo(0) & "条，共" & Tmp & "M,"
Tmp = ""
For A = 2 To Ubound(arrInfo) Step 6
If A = Ubound(arrInfo) - 4 Then
Tmp = Tmp & arrInfo(A) & "(" & arrInfo(A+1) & "),"
Else
Tmp = Tmp & arrInfo(A) & "(" & arrInfo(A+1) & ") "
End If
Next
strOutInfo = strOutInfo & Tmp
Tmp = ""
For A = 4 To Ubound(arrInfo) Step 6
If A = Ubound(arrInfo) - 2 Then
Tmp = Tmp & arrInfo(A) & "(" & arrInfo(A+1) & "),"
Else
Tmp = Tmp & arrInfo(A) & "(" & arrInfo(A+1) & ") "
End If
Next
strOutInfo = strOutInfo & Tmp
'硬盘
Tmp = ""
arrInfo = GetDiskInfo(objRemote)
If Vartype(arrInfo) = 8 Then
OutInfo = arrInfo
Exit Function
End If
For A = 1 To Ubound(arrInfo) Step 5
If arrInfo(A+1) = "IDE" Then
Tmp = arrInfo(A) & "(" & arrInfo(A+2) & "G),"
Exit For
End If
Next
If Tmp = "" Then
strOutInfo = strOutInfo & "硬盘型号未检索到,"
Else
strOutInfo = strOutInfo & Tmp
End If
'显卡
arrInfo = GetVideoInfo(objRemote)
If Vartype(arrInfo) = 8 Then
OutInfo = arrInfo
Exit Function
End If
strOutInfo = strOutInfo & arrInfo(0) & "(" & arrInfo(1) & "M),"
'网卡
arrInfo = GetNetworkInfo(objRemote)
If Vartype(arrInfo) = 8 Then
OutInfo = arrInfo
Exit Function
End If
strOutInfo = strOutInfo & arrInfo(1) & "," & arrInfo(2) & Space(17-Len(arrInfo(2))) & arrInfo(3)
'输出
OutFile.Writeline strOutInfo
intCount1 = intCount1 + 1
OutInfo = True
End Function
'*********************************************************
'目的：连接到远程主机的WMI命名空间
'输入：strComputer：远程主机的计算机名或IP
' strNamespace：命令空间
' strUserName：用户名
' strPassword：密码
'返回：连接成功，返回SWbemLocator类连接远程主机后的对象的实例
' 连接失败，返回错误对象
'*********************************************************
Function LinkServer(strComputer,strNamespace,strUserName,strPassword)
Dim objWbemLocator
Set objWbemLocator = CreateObject("WbemScripting.SWbemLocator")
Dim objConnection
On Error Resume Next
Set objConnection = objwbemLocator.ConnectServer _
(strComputer, strNamespace, strUserName, strPassword)
If Err Then
Set LinkServer = Err
Exit Function
End If
On Error Goto 0
objConnection.Security_.ImpersonationLevel = 3
Set LinkServer = objConnection
End Function
'******************************************
'目的：正则表达式
'输入：strPatrn：正则表达式模式
' strString：要执行正则表达式的字符串
'返回：Match对象
'******************************************
Function GetMatche(strPatrn, strString)
Dim RegEx
Set RegEx = New Regexp
RegEx.Global = True
RegEx.IgnoreCase =True
RegEx.Pattern = strPatrn
Set GetMatche = RegEx.Execute(strString)
End Function
'***************************************
'目的：2、8、16进制转10进制
'输入：strString：2、8、16进制数
' intNum：进制(2|8|16)
'返回：10进制数
'***************************************
Function ChangeToDecimal(strString, intNum)
ChangeToDecimal = 0
If Isnull(strString) Then ChangeToDecimal = 0 : Exit Function
Dim A, M
For A = 1 To Len(strString)
M = LCase(Mid(strString, A, 1))
Select Case M
Case "a" :M = 10
Case "b" :M = 11
Case "c" :M = 12
Case "d" :M = 13
Case "e" :M = 14
Case "f" :M = 15
End Select
ChangeToDecimal = ChangeToDecimal + M * intNum^(Len(strString)-A)
Next
End Function
'*******************************************************
'目的：分析配置信息
'输入：strIP, strUser, strPW：IP[计算机名]、账户、密码
'返回：无，直接把分析结果保存在数组
'*******************************************************
Function GetConfig(strIP, strUser, strPW)
Dim Matches, SubMatche
Dim IP_1, IP_2, IP_3, IP_4, intStar, intEnd, A, intConfigNum
Dim IP_Patrn
IP_Patrn = "([\d]+)\.([\d]+)\.([\d]+)\.([\d]+)-([\d]+)"
Set Matches = GetMatche(IP_Patrn, strIP)
If Matches.Count = 1 Then
Set SubMatche = Matches(0)
intStar = Cint(SubMatche.SubMatches(3))
intEnd = intStar + Cint(SubMatche.SubMatches(4)) - 1
For A = intStar To intEnd
IP_4 = A Mod 256
IP_3 = (Cint(SubMatche.SubMatches(2))+ A\256) Mod 256
IP_2 = (Cint(SubMatche.SubMatches(1)) + (Cint(SubMatche.SubMatches(2))+ A\256)\256) Mod 256
IP_1 = Cint(SubMatche.SubMatches(0)) + (Cint(SubMatche.SubMatches(1)) + _
(Cint(SubMatche.SubMatches(2))+ A\256)\256)\256
If IP_1 > 223 Or IP_1 = 127 Or IP_1 < 1 Then
Msgbox strIP & "包含的" & IP_1 & "." & IP_2 & "." & IP_3 & "." & IP_4 & _
"不是有效IP，此IP及之后的IP已被丢弃"
Exit Function
End If
intConfigNum = (Ubound(arrConfig)+1)\3 + 1
Redim Preserve arrConfig(intConfigNum*3-1)
arrConfig(intConfigNum*3-3) = IP_1 & "." & IP_2 & "." & IP_3 & "." & IP_4
arrConfig(intConfigNum*3-2) = strUser
arrConfig(intConfigNum*3-1) = strPW
Next
Exit Function
End If
Dim ComputerName_Patrn, Prefix, intLen
ComputerName_Patrn = "([\S]+[^0-9]{1})([0]*[\d]+)-([\d]+)"
Set Matches = GetMatche(ComputerName_Patrn, strIP)
If Matches.Count = 1 Then
Set SubMatche = Matches(0)
Prefix = SubMatche.SubMatches(0)
intLen = Len(SubMatche.SubMatches(1))
intStar = Cint(SubMatche.SubMatches(1))
intEnd = intStar + Cint(SubMatche.SubMatches(2)) - 1
For A = intStar To intEnd
intConfigNum = (Ubound(arrConfig)+1)\3 + 1
Redim Preserve arrConfig(intConfigNum*3-1)
If Len(A) < intLen Then
arrConfig(intConfigNum*3-3) = Prefix & String(intLen-Len(A),"0") & A
Else
arrConfig(intConfigNum*3-3) = Prefix & A
End If
arrConfig(intConfigNum*3-2) = strUser
arrConfig(intConfigNum*3-1) = strPW
Next
Exit Function
End If
intConfigNum = (Ubound(arrConfig)+1)\3 + 1
Redim Preserve arrConfig(intConfigNum*3-1)
arrConfig(intConfigNum*3-3) = strIP
arrConfig(intConfigNum*3-2) = strUser
arrConfig(intConfigNum*3-1) = strPW
End Function
'***********************************************************
'目的：获取操作系统信息
'输入：SWbemLocator对象ConnectServer方法连接到远程主机的实例
'返回：数组，上限为2
' 取操作系统的3种属性：
' 0 1 2
' CSName Caption&CSDVersion InstallDate
' 计算机名 系统名&SP版本 初装日期
'LastBootUpTime属性表示系统最近一次的启动时间
'***********************************************************
Function GetOSInfo(objConnection)
Dim arrOSInfo
Dim objSystemInfos, objSystemInfo, arrOS(2)
Dim Tmp
On Error Resume Next
Set objSystemInfos = objConnection.InstancesOf("win32_operatingsystem")
If Err Then
GetOSInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetOSInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
Tmp = objSystemInfos.Count
If Err Then
GetOSInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetOSInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
For Each objSystemInfo In objSystemInfos
arrOS(0) = objSystemInfo.CSName
arrOS(1) = Replace(objSystemInfo.Caption,",","") & " " & objSystemInfo.CSDVersion
arrOS(2) = Mid(CStr(objSystemInfo.InstallDate),1,4) & "-" & _
Mid(CStr(objSystemInfo.InstallDate),5,2) & "-" & _
Mid(CStr(objSystemInfo.InstallDate),7,2) '& ", " & _
'Mid(CStr(objSystemInfo.InstallDate),9,2) & ":" & _
'Mid(CStr(objSystemInfo.InstallDate),11,2) & ":" & _
'Mid(CStr(objSystemInfo.InstallDate),13,2)
Next
If Err Then
GetOSInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetOSInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
GetOSInfo = arrOS
On Error Goto 0
End Function
'***********************************************************
'目的：获取主板信息
'输入：SWbemLocator对象ConnectServer方法连接到远程主机的实例
'返回：数组，上限为2
' 取主板的3种属性：
' 0 1 2
' Product Manufacturer Version
' 型号 厂商 版本
'***********************************************************
Function GetBoardInfo(objConnection)
Dim objboards, objboard, arrBoard(2)
Dim Tmp
On Error Resume Next
Set objboards = objConnection.InstancesOf("Win32_BaseBoard")
If Err Then
GetBoardInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetBoardInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
Tmp = objboards.Count
If Err Then
GetBoardInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetBoardInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
For each objboard In objboards
arrBoard(0) = Replace(Trim(objboard.Product),",","") '型号
arrBoard(1) = Replace(Trim(objboard.Manufacturer),",","") '厂商
arrBoard(2) = Replace(Trim(objboard.Version),",","") '版本
Next
If Err Then
GetBoardInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetBoardInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
GetBoardInfo = arrBoard
On Error Goto 0
End Function
'***********************************************************
'目的：获取BIOS信息
'输入：SWbemLocator对象ConnectServer方法连接到远程主机的实例
'返回：数组，上限为2
' 取BIOS的2种属性：
' 0 1 2
' Manufacturer SMBIOSBIOSVersion ReleaseDate
' 厂商 版本 发行日期
'***********************************************************
Function GetBIOSInfo(objConnection)
Dim objBIOSs, objBIOS, arrBIOS(2)
Dim Tmp
On Error Resume Next
Set objBIOSs = objConnection.InstancesOf("Win32_BIOS")
If Err Then
GetBIOSInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetBIOSInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
Tmp = objBIOSs.Count
If Err Then
GetBIOSInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetBIOSInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
For each objBIOS In objBIOSs
If Isnull(objBIOS.Manufacturer) Then
arrBIOS(0) = "BIOS厂商不存在" '请检查主板驱动是否完善或未安装，或BIOS不完善需要刷BIOS
Else
arrBIOS(0) = Replace(Trim(objBIOS.Manufacturer),",","")
End If
If Isnull(objBIOS.SMBIOSBIOSVersion) Then
arrBIOS(1) = "由SMBIOS汇报的BIOS版本不存在" '请检查主板驱动是否完善或未安装，或BIOS不完善需要刷BIOS
Else
arrBIOS(1) = Replace(Trim(objBIOS.SMBIOSBIOSVersion),",","")
End If
If Isnull(objBIOS.ReleaseDate) Then
arrBIOS(2) = "BIOS发行日期未知" '请检查主板驱动是否完善或未安装，或BIOS不完善需要刷BIOS
Else
arrBIOS(2) = Left(Cstr(objBIOS.ReleaseDate),8)
End If
Next
If Err Then
GetBIOSInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetBIOSInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
GetBIOSInfo = arrBIOS
On Error Goto 0
End Function
'************************************************************
'目的：获取CPU信息
'输入：SWbemLocator对象ConnectServer方法连接到远程主机的实例
'返回：数组，上限为8
' 取CPU的9种属性：
' 0 1 2 3 4
' Name MaxClockSpeed CurrentVoltage ExtClock
' 核心数量 型号 主频 电压 外频
' 5 6 7 8
' AddressWidth L2CacheSize L2CacheSpeed SocketDesignation
' 位宽 L2容量 L2频率 插槽类型
'************************************************************
Function GetCPUInfo(objConnection)
Dim objCPU, objCPUs, arrCPU(8)
On Error Resume Next
Set objCPUs = objConnection.InstancesOf("win32_processor")
If Err Then
GetCPUInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetCPUInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
arrCPU(0) = objCPUs.Count '每个CPU核心都返回一个实例，实例数量即为CPU核心数量
If Err Then
GetCPUInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetCPUInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
For each objCPU In objCPUs
arrCPU(1) = Replace(Trim(objCPU.Name),",","") '型号
arrCPU(2) = objCPU.MaxClockSpeed '主频
arrCPU(3) = ChangeToDecimal(objCPU.CurrentVoltage, 16)/10 '电压
arrCPU(4) = objCPU.ExtClock '外频
arrCPU(5) = objCPU.AddressWidth '位宽
arrCPU(6) = objCPU.L2CacheSize 'L2容量
arrCPU(7) = objCPU.L2CacheSpeed 'L2频率
arrCPU(8) = objCPU.SocketDesignation '插槽类型
Next
If Err Then
GetCPUInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetCPUInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
GetCPUInfo = arrCPU
On Error Goto 0
End Function
'********************************************************************************************
'目的：获取内存信息
'输入：SWbemLocator对象的ConnectServer方法连接到远程主机的实例
'返回：数组，上限为(内存条的数量*6)，0=内存条的数量
' 取内存的6种属性：
' 1 2 3 4 5 6
' capacity Speed DeviceLocator MemoryType FormFactor TypeDetail
' 容量 速度 插槽位置 内存类型 封装(接口)类型 详细类型-系统应用类型
'DeviceLocator属性表示这个内存所在的插槽
' 一般是字符加数字，数字相当于主板上内存插槽的物理位置
'********************************************************************************************
Function GetMemoryInfo(objConnection)
Dim objMemorys, objMemory, Num
Redim arrMemory(0)
On Error Resume Next
Set objMemorys = objConnection.InstancesOf("Win32_PhysicalMemory")
If Err Then
GetMemoryInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetMemoryInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
arrMemory(0) = objMemorys.Count '每条内存都返回一个实例，实例项数即内存条数量
If Err Then
GetMemoryInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetMemoryInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
Num = 0
For Each objMemory In objMemorys
Num = Num + 1
Redim Preserve arrMemory(Num*6)
arrMemory(Num*6-5) = objMemory.capacity/1048576 '容量(M)
arrMemory(Num*6-4) = objMemory.Speed '速度(MHz)
arrMemory(Num*6-3) = objMemory.DeviceLocator '插槽位置
Select Case objMemory.MemoryType '内存类型，
Case 0 :arrMemory(Num*6-2) = "Unknown" '未知
Case 1 :arrMemory(Num*6-2) = "Other" '其它
Case 2 :arrMemory(Num*6-2) = "DRAM" '动态随机存储器
Case 3 :arrMemory(Num*6-2) = "Synchronous DRAM" '同步动态随机存储器
Case 4 :arrMemory(Num*6-2) = "Cache DRAM" '同步缓存动态随机存储器,三菱专利技术,插入一个SRAM作为二级CACHE使用
Case 5 :arrMemory(Num*6-2) = "EDO" '外扩充数据模式存储器(Extended Date Out)
Case 6 :arrMemory(Num*6-2) = "EDRAM" '增强型动态随机存储器，在DRAM中包括了一小部分的SRAM(Enhanced DRAM)
Case 7 :arrMemory(Num*6-2) = "VRAM" '视频存储器,专门为图形应用优化的存储器(Video DRAM)
Case 8 :arrMemory(Num*6-2) = "SRAM" '静态随机存储器
Case 9 :arrMemory(Num*6-2) = "RAM" '随机存储器
Case 10 :arrMemory(Num*6-2) = "ROM" '只读存储器
Case 11 :arrMemory(Num*6-2) = "Flash" '闪速存储器,简称闪存(Flash Memory),属于EEPROM(电擦除可编程只读存储器)类型
Case 12 :arrMemory(Num*6-2) = "EEPROM" '电可擦写可编程只读存储器
Case 13 :arrMemory(Num*6-2) = "FEPROM" 'F什么可擦写可编程只读存储器
Case 14 :arrMemory(Num*6-2) = "EPROM" '可擦写可编程只读存储器(Erasable Programmable ROM)
Case 15 :arrMemory(Num*6-2) = "CDRAM" '同步缓存动态随机存储器,即Cache DRAM
Case 16 :arrMemory(Num*6-2) = "3DRAM" '3维视频处理器专用存储器(3 DIMESION RAM)
Case 17 :arrMemory(Num*6-2) = "SDRAM" '同步动态随机存储器,即Synchronous DRAM
Case 18 :arrMemory(Num*6-2) = "SGRAM" '单口随机存储器(Signal RAM)
Case 19 :arrMemory(Num*6-2) = "RDRAM" '总线式动态随机存储器
Case 20 :arrMemory(Num*6-2) = "DDR" '双倍速率同步动态随机存储器,一个时钟周期内传输二次数据
Case 21 :arrMemory(Num*6-2) = "DDR-2" '双倍速率同步动态随机存储器2,一个时钟周期内传输二次数据,4bit数据预读取能力
End Select
Select Case objMemory.FormFactor '封装类型(接口类型)
Case 0 :arrMemory(Num*6-1) = "Unknown" '未知
Case 1 :arrMemory(Num*6-1) = "Other" '其它
Case 2 :arrMemory(Num*6-1) = "SIP" '单列直插式封装
Case 3 :arrMemory(Num*6-1) = "DIP" '双列直插式封装(Dual ln-line Package)
Case 4 :arrMemory(Num*6-1) = "ZIP" '零插拔力封装(Zero Insertion Package)
Case 5 :arrMemory(Num*6-1) = "SOJ" '小尺寸(小外形)J形引脚封装(Small Out-Line J-Lead)
Case 6 :arrMemory(Num*6-1) = "Proprietary" '专有封装(有专利权的)
Case 7 :arrMemory(Num*6-1) = "SIMM" '单列直插式封装(Single Inline Memory Module)
Case 8 :arrMemory(Num*6-1) = "DIMM" '双列直插式封装(Dual Inline Memory Module)
Case 9 :arrMemory(Num*6-1) = "TSOP" '薄型小尺寸封装(Thin Small Outline Package)
Case 10 :arrMemory(Num*6-1) = "PGA" '陈列引脚封装。底面的垂直引脚呈陈列状排列。用于高速大规模逻辑LSI电路。
Case 11 :arrMemory(Num*6-1) = "RIMM" '总线式封装,RIMM是Rambus公司生产的RDRAM内存所采用的接口类型
Case 12 :arrMemory(Num*6-1) = "SODIMM" '小尺寸双列直插式封装(Small Outline DIMM Module)
Case 13 :arrMemory(Num*6-1) = "SRIMM" '小尺寸总线式封装
Case 14 :arrMemory(Num*6-1) = "SMD" '表面贴装型封装(Surface Mounted Devices),也叫贴片封装
Case 15 :arrMemory(Num*6-1) = "SSMP" '未搜到此类型的信息，谁知道的请告诉偶，谢谢
Case 16 :arrMemory(Num*6-1) = "QFP" '方型扁平封装(Quad Flat Package)
Case 17 :arrMemory(Num*6-1) = "TQFP" '薄方型扁平封装
Case 18 :arrMemory(Num*6-1) = "SOIC" '小尺寸集成电路封装,SOP(Small Outline Package，小外形封装)之一
Case 19 :arrMemory(Num*6-1) = "LCC" '无引脚封装,指只有电极接触而无引脚的表面贴装型封装
Case 20 :arrMemory(Num*6-1) = "PLCC" '塑封J形引脚封装
Case 21 :arrMemory(Num*6-1) = "BGA" '球栅阵列封装,在背面按陈列方式制作出球形凸点代替引脚
Case 22 :arrMemory(Num*6-1) = "FPBGA" '方型扁平球栅阵列封装
Case 23 :arrMemory(Num*6-1) = "LGA" '触点陈列封装。
End Select
Select Case objMemory.TypeDetail '详细类型(系统用于那方面的应用)
Case 1 :arrMemory(Num*6) = "Reserved" '预留
Case 2 :arrMemory(Num*6) = "Other" '其它
Case 4 :arrMemory(Num*6) = "Unknown" '未知
Case 8 :arrMemory(Num*6) = "Fast-paged" '快速分页
Case 16 :arrMemory(Num*6) = "Static column" '静态列
Case 32 :arrMemory(Num*6) = "Pseudo-static" '假静态
Case 64 :arrMemory(Num*6) = "RAMBUS" 'Rambus公司
Case 128 :arrMemory(Num*6) = "Synchronous" '同步
Case 256 :arrMemory(Num*6) = "CMOS" '互补
Case 512 :arrMemory(Num*6) = "EDO" '外扩充
Case 1024 :arrMemory(Num*6) = "Window DRAM" '视频
Case 2048 :arrMemory(Num*6) = "Cache DRAM" '缓存
Case 4096 :arrMemory(Num*6) = "Nonvolatile" '非易失性
End Select
Next
If Err Then
GetMemoryInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetMemoryInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
If Num = 0 Then
Redim Preserve arrMemory(6)
End If
GetMemoryInfo = arrMemory
On Error Goto 0
End Function
'***************************************************************************************
'目的：获取硬盘信息
'输入：SWbemLocator对象的ConnectServer方法连接到远程主机的实例
'返回：数组，上限为(硬盘数量*5)，0=硬盘的数量
' 取硬盘的4种属性：
' 1 2 3 4 5
' Model InterfaceType Size MediaType DeviceID
' 型号 接口 容量 类型 设备标识符
'注意：InterfaceType是指接口类型，有5个值：SCSI、HDC、IDE、USB、1394
' MediaType属性是指媒体类型：
' Vista下有四个值： External hard disk media:外接硬盘
' Removable media other than floppy:移动媒体或软盘
' Fixed hard disk media:固定硬盘
' Format is unknown:未知类型
' NT 4.0/2000/XP/2003下有三个值： Removable media:移动媒体
' Fixed hard disk:固定硬盘
' Unknown:未知类型
' Size属性是1000进制，返回结果是以1024进制换算成G取小数点后二位数,和磁盘管理里看到的相同
'***************************************************************************************
Function GetDiskInfo(objConnection)
Dim objDisks, objDisk, Num
Dim Tmp
On Error Resume Next
Set objDisks = objConnection.InstancesOf("win32_Diskdrive")
If Err Then
GetDiskInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetDiskInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
Tmp = objDisks.Count
If Err Then
GetDiskInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetDiskInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
Redim arrDisk(0)
Num = 0
For Each objDisk In objDisks
Num = Num + 1
Redim Preserve arrDisk(Num*5)
arrDisk(Num*5-4) = Replace(Trim(objDisk.Model),",","") '型号
arrDisk(Num*5-3) = objDisk.InterfaceType '接口
arrDisk(Num*5-2) = Round(objDisk.Size/1073741824,2) '容量(G)
arrDisk(Num*5-1) = objDisk.MediaType '类型
arrDisk(Num*5-0) = objDisk.DeviceID
Next
If Err Then
GetDiskInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetDiskInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
If Num = 0 Then
Redim Preserve arrDisk(5)
End If
GetDiskInfo = arrDisk
On Error Goto 0
End Function
'***********************************************************
'目的：获取显卡信息
'输入：SWbemLocator对象ConnectServer方法连接到远程主机的实例
'返回：数组，上限为2
' 取显卡的3种属性：
' 0 1 2
' Description AdapterRAM DeviceID
' 描述 显存 设备标识符
'注意：AdapterRAM属性的单位是字节，返回结果已换算成M字节
'***********************************************************
Function GetVideoInfo(objConnection)
Dim objVideos, objVideo, arrVideo(2)
Dim Tmp
On Error Resume Next
Set objVideos = objConnection.InstancesOf("win32_videocontroller")
If Err Then
GetVideoInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetVideoInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
Tmp = objVideos.Count
If Err Then
GetVideoInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetVideoInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
For Each objVideo In objVideos
If Not IsNull(objVideo.VideoModeDescription) Then
arrVideo(0) = Replace(Trim(objVideo.Description),",","")
arrVideo(1) = objVideo.AdapterRAM/1048576
arrVideo(2) = objVideo.DeviceID
End If
Next
If Err Then
GetVideoInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetVideoInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
GetVideoInfo = arrVideo
On Error Goto 0
End Function
'************************************************************************
'目的：获取网卡信息(使用Ethernet 802.3协议的网络适配器，即以太网网卡)
'输入：SWbemLocator对象ConnectServer方法连接到远程主机的实例
'返回：数组，上限为(网卡数量*6)，0=网卡的数量
' 取网卡的6种属性：
' 1 2 3 4
' Description IPAddress(0) MACAddress IPXVirtualNetNumber
' 型号 IP MAC 内部网络号
' 5 6
' NetConnectionID DeviceID
' 接口名称 设备标识符
'************************************************************************
Function GetNetworkInfo(objConnection)
Dim objNetworks, objNetwork, objNetworks_2, objNetwork_2, Num
Dim Tmp
Redim arrNetwork(0)
Num = 0
On Error Resume Next
Set objNetworks = objConnection.InstancesOf("Win32_NetworkAdapter")
If Err Then
GetNetworkInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetNetworkInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
Tmp = objNetworks.Count
If Err Then
GetNetworkInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetNetworkInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
Set objNetworks_2 = objConnection.InstancesOf("Win32_NetworkAdapterConfiguration")
If Err Then
GetNetworkInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetNetworkInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
Tmp = objNetworks_2.Count
If Err Then
GetNetworkInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetNetworkInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
For Each objNetwork In objNetworks
If objNetwork.Manufacturer <> "Microsoft" And Not Isnull(objNetwork.MACAddress) Then
Num = Num + 1
Redim Preserve arrNetwork(Num*6)
arrNetwork(Num*6-5) = objNetwork.Description
arrNetwork(Num*6-3) = Replace(objNetwork.MACAddress,":","-")
arrNetwork(Num*6-0) = objNetwork.DeviceID
arrNetwork(Num*6-1) = objNetwork.NetConnectionID
If Err.Number = 438 Then
arrNetwork(Num*6-1) = "未检测到" '2000系统不支持NetConnectionID属性
Err.Clear
End If
For Each objNetwork_2 In objNetworks_2
If objNetwork_2.Index = objNetwork.Index Then
arrNetwork(Num*6-4) = objNetwork_2.IPAddress(0) 'IPAddress属性返回结果是数组
arrNetwork(Num*6-2) = objNetwork_2.IPXVirtualNetNumber
Exit For
End If
Next
End If
Next
If Err Then
GetNetworkInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetNetworkInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
If Num = 0 Then
Redim Preserve arrNetwork(6)
End If
arrNetwork(0) = Num
GetNetworkInfo = arrNetwork
On Error Goto 0
End Function
'***********************************************************
'目的：获取声卡信息
'输入：SWbemLocator对象ConnectServer方法连接到远程主机的实例
'返回：数组，上限2
' 取声卡的3种属性：
' 0 1 2
' ProductName Manufacturer DeviceID
' 型号 厂商 设备标识符
'***********************************************************
Function GetSoundInfo(objConnection)
Dim objSounds, objSound
Dim Tmp
Dim arrSound(2)
On Error Resume Next
Set objSounds = objConnection.InstancesOf("Win32_SoundDevice")
If Err Then
GetSoundInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetSoundInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
Tmp = objSounds.Count
If Err Then
GetSoundInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetSoundInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
For Each objSound In objSounds
arrSound(0) = Replace(objSound.ProductName,",","")
arrSound(1) = Replace(objSound.Manufacturer,",","")
arrSound(2) = objSound.DeviceID
Next
If Err Then
GetSoundInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetSoundInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
GetSoundInfo = arrSound
On Error Goto 0
End Function
'*****************************************************************
'目的：获取集成设备的信息
'输入：SWbemLocator对象ConnectServer方法连接到远程主机的实例
'返回：数组，上限为(集成设备数量*3)，0=集成设备的数量
' 取集成设备的3种属性：
' 1 2 3
' Description DeviceType Enabled
' 设备描述 类型 是否启用
'*****************************************************************
Function GetOnBoardInfo(objConnection)
Dim objOnBoards, objOnBoard, Num
Redim arrOnBoard(0)
Num = 0
On Error Resume Next
Set objOnBoards = objConnection.InstancesOf("Win32_OnBoardDevice")
If Err Then
GetOnBoardInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetOnBoardInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
arrOnBoard(0) = objOnBoards.Count
If Err Then
GetOnBoardInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetOnBoardInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
For Each objOnBoard In objOnBoards
Num = Num + 1
Redim Preserve arrOnBoard(Num*3)
arrOnBoard(Num*3-2) = Replace(objOnBoard.Description,",","")
Select Case objOnBoard.DeviceType
Case 1 :arrOnBoard(Num*3-1) = "其它设备"
Case 2 :arrOnBoard(Num*3-1) = "未知设备"
Case 3 :arrOnBoard(Num*3-1) = "显示设备"
Case 4 :arrOnBoard(Num*3-1) = "SCSI设备"
Case 5 :arrOnBoard(Num*3-1) = "以太网设备"
Case 6 :arrOnBoard(Num*3-1) = "令牌环网设备"
Case 7 :arrOnBoard(Num*3-1) = "声音设备"
End Select
arrOnBoard(Num*3-0) = objOnBoard.Enabled
Next
If Err Then
GetOnBoardInfo = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetOnBoardInfo Function"
Err.Clear
On Error Goto 0
Exit Function
End If
If Num = 0 Then
Redim Preserve arrOnBoard(3)
End If
GetOnBoardInfo = arrOnBoard
On Error Goto 0
End Function
'***********
'排序硬件信息
'***********
Function Sort(FilePath)
Dim ReadFile, Num, OutputFile, Item, A, B, strA, strB, Tmp
Redim arrRead(0)
Set ReadFile = FSO.OpenTextFile(FilePath)
Do Until ReadFile.AtEndOfStream
Num = ReadFile.Line
Redim Preserve arrRead(Num)
arrRead(Num-1) = ReadFile.ReadLine
Loop
Set ReadFile = Nothing
For A = 1 To Ubound(arrRead) - 2
For B = A + 1 To Ubound(arrRead) - 1
If Not Strcomp(arrRead(A),arrRead(B)) Then
Tmp = arrRead(A)
arrRead(A) = arrRead(B)
arrRead(B) = Tmp
End If
Next
Next
Set OutputFile = FSO.OpenTextFile(FSO.GetBaseName(FilePath) & "_已排序." & _
FSO.GetExtensionName(FilePath),2,True)
For Each Item In arrRead
OutputFile.Writeline Item
Next
Set OutputFile = Nothing
End Function
'********************************************************************
'目的：获取IDE控制器使用的访问受控设备的协议
'输入：SWbemLocator对象ConnectServer方法连接到远程主机的实例
'返回：数组，上限为(IDE控制器数量*2)，0=IDE控制器数量
' 取2种属性：
' 1 2
' DeviceID ProtocolSupported
' 设备标识符 控制协议
'********************************************************************
Function GetIDEProtocol(objConnection)
Dim objIDEProtocol, IDEItem, Num
Dim Tmp
Redim arrIDE(0)
Num = 0
On Error Resume Next
Set objIDEProtocol = objConnection.InstancesOf("Win32_IDEController")
If Err Then
GetIDEProtocol = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetIDEProtocol Function"
Err.Clear
On Error Goto 0
Exit Function
End If
Tmp = objIDEProtocol.Count
If Err Then
GetIDEProtocol = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetIDEProtocol Function"
Err.Clear
On Error Goto 0
Exit Function
End If
For Each IDEItem In objIDEProtocol
'Msgbox IDEItem.DeviceID & vbCrLf & IDEItem.ProtocolSupported
Num = Num + 1
Redim Preserve arrIDE(Num*2)
arrIDE(Num*2-1) = IDEItem.DeviceID
Select Case IDEItem.ProtocolSupported
Case 1 :arrIDE(Num*2) = "Other"
Case 2 :arrIDE(Num*2) = "Unknown"
Case 3 :arrIDE(Num*2) = "EISA"
Case 4 :arrIDE(Num*2) = "ISA"
Case 5 :arrIDE(Num*2) = "PCI"
Case 6 :arrIDE(Num*2) = "ATA/ATAPI"
Case 7 :arrIDE(Num*2) = "Flexible Diskette"
Case 8 :arrIDE(Num*2) = "1496"
Case 9 :arrIDE(Num*2) = "SCSI Parallel Interface"
Case 10 :arrIDE(Num*2) = "SCSI Fibre Channel Protocol"
Case 11 :arrIDE(Num*2) = "SCSI Serial Bus Protocol"
Case 12 :arrIDE(Num*2) = "SCSI Serial Bus Protocol-2 (1394)"
Case 13 :arrIDE(Num*2) = "SCSI Serial Storage Architecture"
Case 14 :arrIDE(Num*2) = "VESA"
Case 15 :arrIDE(Num*2) = "PCMCIA"
Case 16 :arrIDE(Num*2) = "Universal Serial Bus"
Case 17 :arrIDE(Num*2) = "Parallel Protocol"
Case 18 :arrIDE(Num*2) = "ESCON"
Case 19 :arrIDE(Num*2) = "Diagnostic"
Case 20 :arrIDE(Num*2) = "I2C"
Case 21 :arrIDE(Num*2) = "Power"
Case 22 :arrIDE(Num*2) = "HIPPI"
Case 23 :arrIDE(Num*2) = "MultiBus"
Case 24 :arrIDE(Num*2) = "VME"
Case 25 :arrIDE(Num*2) = "IPI"
Case 26 :arrIDE(Num*2) = "IEEE-488"
Case 27 :arrIDE(Num*2) = "RS232"
Case 28 :arrIDE(Num*2) = "IEEE 802.3 10BASE5"
Case 29 :arrIDE(Num*2) = "IEEE 802.3 10BASE2"
Case 30 :arrIDE(Num*2) = "IEEE 802.3 1BASE5"
Case 31 :arrIDE(Num*2) = "IEEE 802.3 10BROAD36"
Case 32 :arrIDE(Num*2) = "IEEE 802.3 100BASEVG"
Case 33 :arrIDE(Num*2) = "IEEE 802.5 Token-Ring"
Case 34 :arrIDE(Num*2) = "ANSI X3T9.5 FDDI"
Case 35 :arrIDE(Num*2) = "MCA"
Case 36 :arrIDE(Num*2) = "ESDI"
Case 37 :arrIDE(Num*2) = "IDE"
Case 38 :arrIDE(Num*2) = "CMD"
Case 39 :arrIDE(Num*2) = "ST506"
Case 40 :arrIDE(Num*2) = "DSSI"
Case 41 :arrIDE(Num*2) = "QIC2"
Case 42 :arrIDE(Num*2) = "Enhanced ATA/IDE"
Case 43 :arrIDE(Num*2) = "AGP"
Case 44 :arrIDE(Num*2) = "TWIRP (two-way infrared)"
Case 45 :arrIDE(Num*2) = "FIR (fast infrared)"
Case 46 :arrIDE(Num*2) = "SIR (serial infrared)"
Case 47 :arrIDE(Num*2) = "IrBus"
End Select
Next
If Err Then
GetIDEProtocol = "错误编号：" & CStr(Err.Number) & _
"，错误原因：" & CStr(Err.Description) & _
"，错误来源：" & CStr(Err.Source) & " By GetIDEProtocol Function"
Err.Clear
On Error Goto 0
Exit Function
End If
If Num = 0 Then
Redim Preserve arrIDE(2)
End If
arrIDE(0) = Num
GetIDEProtocol = arrIDE
On Error Goto 0
End Function
'*******************************************************************************************
'Version:3.1
' 调整错误处理方法，错误信息输出到LogFile文件，可以查看扫描失败原因
' 如果出现“RPC 服务器不可用”错误，是因为远程主机没开机
' 如果出现“RPC 服务器不可用”之外的错误，可能是由于正在运行的程序造成，请你把此信息告诉我
' 重启后再次扫描就可以排除非“RPC 服务器不可用。”的错误
' 如果扫描到的硬件信息为空，应该是驱动问题(或BIOS不完善)，请自行解决
'Version:3.0
' 增加输出BIOS的发行日期，和主板信息放在一起
'Version:2.9
' 修正所有GetInfo过程遇错的处理方法,避免返回的数组上限不符合输出要求导致脚本报错。
' 之所以为出现这种情况，是因为Win32类检索不到硬件或连接到Win32类失败；
' 原来判断是否出现Err，忽略了检索不到硬件的情况(连接成功无Err,Count为0)
' 检索不到硬件多数是因为驱动没装好
'Version:2.8
' 增加GetIDEProtocol过程，获取IDE控制器使用的协议，只是增加了代码，没有调用
' 计划增加检索其它存储器控制器的过程
'Version:2.7
' 检索硬盘/显卡/网卡/声卡的过程增加 DeviceID 属性(设备标识符)
' 此属性不被输出，用于脚本内部判断
'Version:2.6
' 原来输出搜索到的第一个硬盘
' 改为输出搜索到的第一个InterfaceType属性为IDE的硬盘的信息
'Version:2.5
' 增加Sort过程，排序硬件信息
'Version:2.4
' 调整输出信息的分类，同类信息尽可能的只使用一个逗号分隔，以便导入xls后在同一列
' 查询到的硬件信息如果是空或0，有可能是相关驱动不完善或未定义此信息，也可能是未安装驱动
' 因为WMI查询就代表了系统知道这些硬件的详细信息，查不到信息就是系统不知道
' 系统不知道硬件的详细信息，代表着性能可能有所缺失，建议找个好驱动安装
' 值得注意的是主板驱动
' (为了更容易理解，此版本的升级信息被编辑过)
'Version:2.3
' 取消2.2版增加输出的硬盘接口类型
' 由于STAT也归于IDE接口，这会导致误解
' PS：脚本只输出搜索到的第一个硬盘
'Version:2.2
' GetMemoryInfo过程增加MemoryType、FormFactor、TypeDetail三个属性
' 输出增加内存类型、封装类型
' 输出增加硬盘容量、接口类型
'Version:2.1
' GetOSInfo过程增加去掉Caption属性中带有的逗号“,”的代码
' 原因：在检测2003系统时，读取到的Caption属性，带有逗号“,”
' 这会影响输出，因为输出是以逗号“,”为分隔符的
'Version:2.0 B5发布版
' GetNetworkInfo过程改为使用MACAddress属性非空、
' Manufacturer属性非"Microsoft"判断网卡
'Version:2.0 Beta4
' GetNetworkInfo过程使用NetConnectionStatus属性判断网络适配器
' NetConnectionStatus属性表明连接状态(2000系统不支持此属性)
' 物理网络适配器才具有此状态(包括停用状态在内)
'Version:2.0 Beta3
' GetNetworkInfo过程增加一个判断
' 忽略读取IPAddress(0)时会产生Err类型数据的适配器(对战平台)
'Version:2.0 Beta2
' GetOSInfo过程原来使用的Name、ServicePackMajorVersion属性
' 改为使用Caption、CSDVersion属性
' 所有GetInfo过程增加错误处理代码，避免正在扫描的时候
' 脚本遇到运行时错误导致脚本退出
'Version:2.0 Beta1
' 增加扫描失败记录，再次运行脚本只读取失败记录，忽略配置信息
'Version:1.1
' GetNetworkInfo过程增加一个判断
' 忽略NetConnectionID属性(接口名称)为空的适配器
'Version:1.0
' 初始版本
'*******************************************************************************************
代码二：
Set wmi=GetObject("winmgmts:\\")
Set board=wmi.instancesof("win32_baseboard")
For Each b In board
msg="主板："&b.Manufacturer&vbTab&b.product&vbTab&Chr(13)
Next
msg=msg&Chr(13)&"---"+Chr(13)
Set cpus=wmi.instancesof("win32_processor")
msg=msg&"CPU 特征:"+Chr(13)
For Each cpu In cpus
msg=msg+cpu.deviceid&vbTab&cpu.name&Chr(13) _
&vbtab&cpu.SocketDesignation&vbtab&cpu.CurrentClockSpeed&"MHz"&vbtab&cpu.l2cachesize&"Kb_L2"&Chr(13)
Next
msg=msg&Chr(13)&"---"+Chr(13)
Set mem=wmi.instancesof("win32_physicalmemory")
msg=msg&"内存容量："+Chr(13)
For Each m In mem
msg=msg&m.tag&space(10)&m.capacity&+Chr(13)
Next
Set mem=wmi.instancesof("win32_computersystem")
For Each m In mem
msg=msg&"内存总容量："&Round((m.totalphysicalmemory/1024^2),2)&"M"+Chr(13)
Next
msg=msg&Chr(13)&"---"+Chr(13)
Set display=wmi.instancesof("Win32_videocontroller")
msg=msg&"显示系统："+Chr(13)
For Each video In display
msg=msg&video.deviceid&vbTab&video.name&Chr(13)
Next
msg=msg&Chr(13)&"---"+Chr(13)
Set disks=wmi.instancesof("win32_diskdrive")
msg=msg&"硬盘容量："+Chr(13)
For Each d In disks
If int(d.size/(1024^3))=0 Then
n=Round(d.size/(1024^2),2)&"M"
Else
n=Round(d.size/(1024^3),2)&"G"
End If
msg=msg+d.deviceid&" 空间为： "&n&Chr(13)
Next
msg=msg&Chr(13)&"---"+Chr(13)
MsgBox msg,0,"电脑基本特征"
效果图：
以上就是【用vbs实现获取电脑硬件信息的脚本_最新版】的全部内容了,欢迎留言评论进行交流!